غرف جاهزة متنقلة حديثة راقية

What Is the K108 Flat Pack Container Layout?

The K108 is a partitioned flat pack container model with two separate rooms and a central bathroom.

The internal layout is organized around a middle access zone. From the central external entrance, users can access the left room, the bathroom area, and the right room through three internal doors.

This layout is suitable for:

• Two-room accommodation unit

• Worker camp room with bathroom

• Supervisor accommodation unit

• Site office with internal bathroom

• Staff room with shower and WC

• Remote project housing unit

• Security room with rest area and bathroom

• Welfare unit with sanitary facilities

• Temporary project building

• Camp support unit

K108 is designed for projects where a simple room layout is not enough and where internal bathroom access improves user comfort and site functionality.

Two Separate Rooms with a Central Bathroom

The main advantage of the K108 layout is that it combines two usable rooms with a complete internal bathroom.

The two rooms can be used for sleeping, office work, staff rest, security use, or project support. The central bathroom can serve both rooms from inside the unit.

Possible arrangements include:

• Two accommodation rooms with shared bathroom

• Office + rest room with bathroom

• Supervisor room + support room

• Staff room + sleeping room

• Security room + accommodation room

• Camp room with WC and shower

• Welfare room with internal sanitary area

This makes K108 more complete than simple two-room models because it includes both room separation and internal sanitary facilities.

Central Bathroom with WC, Washbasin, and Shower

The central bathroom is the defining feature of the K108 layout.

The bathroom area may include:

• WC

• Washbasin

• Shower area

• Water supply preparation

• Wastewater drainage

• Sanitary piping

• Ventilation consideration

• Lighting

• Easy-clean surfaces

• Plumbing installation

The bathroom location in the middle of the unit allows both rooms to access the sanitary area without needing a separate external toilet or shower building for basic daily use.

This is especially important for accommodation projects, remote sites, and temporary facilities where users need practical internal hygiene facilities.

External Door in the Middle

The K108 layout includes one external entrance door positioned in the middle of the container.

This central entrance creates organized access to the full layout. From the main entrance, users can access the left room, the bathroom, and the right room without passing through another private room.

This is useful when:

• Two rooms need privacy

• The bathroom should be accessible from a central zone

• One controlled external entrance is preferred

• The unit is used for accommodation

• The unit is used as an office with internal bathroom

• The project needs a practical layout for daily use

The middle entrance helps the K108 function as a compact self-contained unit.

Three Internal Doors for Room and Bathroom Separation

The K108 layout includes three internal doors:

• One door to the left room

• One door to the bathroom

• One door to the right room

This arrangement keeps the rooms and bathroom separated, improving privacy and usability.

The three-door internal layout is useful when the unit is used by more than one person, or when the two rooms serve different functions such as office and accommodation, supervisor room and rest room, or two staff rooms.

One Window for Each Room

Each room in the K108 layout includes one window. This helps both rooms receive natural light and supports better daily comfort.

The window arrangement makes each room more suitable for:

• Accommodation use

• Office work

• Staff rest

• Security use

• Camp room use

• Temporary project support

Having one window per room is important because both rooms can function as independent spaces.

Suitable for Accommodation and Worker Camps

K108 is highly suitable for accommodation and worker camp projects because it includes two rooms and a full internal bathroom.

An accommodation arrangement may include:

• Sleeping room

• Second sleeping room or support room

• Bed and wardrobe arrangement

• Desk and chair

• Personal storage

• Lighting and sockets

• Internal WC

• Internal washbasin

• Internal shower

• HVAC preparation

• Nearby camp infrastructure when required

This model can reduce the need for users to rely only on external sanitary facilities, especially in small camps, remote sites, or staff accommodation areas.

For larger accommodation projects, flat pack container camps provide complete modular camp solutions with accommodation units, offices, dining areas, sanitary units, and project support buildings.

Suitable for Site Offices with Bathroom

K108 can also be used as a site office or supervisor unit with internal bathroom facilities.

Possible office-oriented uses include:

• Site office with private bathroom

• Supervisor office with rest room

• Project office with internal WC and shower

• Security office with accommodation support

• Remote office unit

• Temporary management unit

• Office + accommodation combination

This makes K108 useful for sites where staff may need to stay for long hours, work in remote areas, or require a self-contained unit with internal sanitary access.

For dedicated office applications, flat pack container offices provide modular workspace solutions for construction sites, industrial facilities, project offices, and temporary business operations.

Suitable for Remote Projects and Temporary Facilities

Remote project locations often need units that combine room space and sanitary facilities in one structure. K108 supports this requirement by integrating a bathroom into the layout.

It can be used for:

• Remote construction sites

• Infrastructure projects

• Industrial facilities

• Mining support sites

• Security posts

• Temporary staff housing

• Field offices

• Project accommodation

• Emergency support facilities

The integrated bathroom makes the unit more independent than basic room-only models.

K108 Layout Features

The K108 flat pack container layout is designed for privacy, daily comfort, and integrated sanitary use.

Key layout features include:

• Two separate rooms

• Central bathroom area

• WC, washbasin, and shower

• One external entrance door in the middle

• Three internal doors

• One window for each room

• Suitable for accommodation or office use

• Practical layout for camps and remote projects

• Electrical installation

• Plumbing installation

• Insulated wall system

• Portable modular structure

• Fast-assembly flat pack system

• Temporary or semi-permanent use

The layout can be customized according to project function, furniture needs, bathroom requirements, electrical layout, and site conditions.

Electrical and Plumbing Installation

Because K108 includes a bathroom, both electrical and plumbing systems are important parts of the layout.

Depending on project scope, the unit may include:

• Electrical sockets

• Lighting points

• Switches

• Cable infrastructure

• Water supply preparation

• Wastewater drainage preparation

• Sanitary fixture connections

• Shower plumbing

• Washbasin plumbing

• WC connection

• Ventilation allowance

• Easy-clean bathroom finishes

The final electrical and plumbing specification should be confirmed according to project requirements, destination standards, and site utility connections.

Shared Technical System

The K108 uses the same technical system as the Prefabex flat pack container range, including insulated sandwich panels, galvanized steel profiles, PVC windows, steel doors, electrical installation, sanitary installation, and lifting system for handling and installation.

Typical technical features may include:

• Galvanized steel profile construction

• Insulated sandwich panel walls

• External wall height around 2600 mm

• Internal clear height around 2350 mm

• PVC framed windows

• Steel sheet external door

• Internal doors

• Electrical installation

• Plumbing installation

• PVC floor covering

• Fiber cement board floor base

• Roof insulation

• Lifting system for loading and installation

Final specifications may vary depending on project requirements, sanitary configuration, destination standards, and production layout.

K108 vs K107 Flat Pack Container

K108 and K107 are both two-room layouts with a central sanitary area, but they serve different needs.

K107 includes a central toilet area with WC and washbasin.

K108 includes a more complete bathroom with WC, washbasin, and shower.

Choose K108 when:

• A shower is required inside the unit

• The unit will be used for accommodation

• Users need more complete hygiene facilities

• The project is remote

• External shower facilities are limited

• The unit needs to be more self-contained

• Staff comfort is a priority

Choose K107 when:

• A WC and washbasin are enough

• Shower facilities are provided elsewhere

• The project needs a simpler sanitary layout

• More internal space is needed outside the bathroom area

K108 vs Standard Two-Room Layouts

Standard two-room layouts are suitable when the project needs privacy but does not require internal sanitary facilities.

K108 is better when:

• Two rooms are required

• A full bathroom is required

• The unit will support accommodation use

• Site users need WC, washbasin, and shower access

• The project needs a more complete modular unit

• Remote site use is expected

This makes K108 one of the strongest layouts for accommodation-style use within the flat pack container range.

Customization Options

Prefabex can customize the K108 flat pack container according to project requirements and intended use.

Customization options may include:

• Room layout adjustment

• Bathroom configuration

• Shower area details

• Door position

• Window position

• Furniture arrangement

• Bed and wardrobe arrangement

• Office desk layout

• Electrical outlet layout

• Lighting layout

• HVAC preparation

• Interior finish

• Bathroom finish

• Floor covering options

• Exterior color

• Branding or signage

• Security features

• Export preparation

The correct configuration depends on whether the unit will be used as accommodation, office space, welfare space, or a mixed-use project facility.

Why Choose Prefabex K108 Flat Pack Container?

Prefabex K108 provides a practical two-room modular container layout with a central bathroom for projects that need privacy, comfort, and integrated sanitary facilities.

The K108 flat pack container offers:

• Two separate rooms

• Central bathroom with WC, washbasin, and shower

• One external entrance door in the middle

• Three internal doors

• One window for each room

• More complete sanitary function than toilet-only layouts

• Suitable for accommodation and office use

• Practical use in camps and remote project facilities

• Electrical and plumbing installation

• Portable modular structure

• Fast on-site assembly

• Insulated wall system

• Flexible furniture arrangement options

• Temporary or semi-permanent use

• Suitable for construction, industrial, commercial, and remote projects

• Custom layout and finish options

• Export preparation and international delivery support

• Professional installation support when required

Whether you need one self-contained modular container or multiple K108 units for a larger camp or site project, Prefabex can prepare a suitable solution based on your requirements.

Request a Quote for Flat Pack Container K108

If you need a two-room flat pack container with an internal bathroom and shower for accommodation, site offices, camp units, staff rooms, welfare spaces, or temporary project facilities, Prefabex can help you choose the right configuration.

Send us your required quantity, intended use, site location, furniture needs, bathroom requirements, electrical requirements, plumbing requirements, delivery destination, and installation scope.

Prefabex can prepare a customized K108 flat pack container proposal based on your project requirements.

FAQ – Flat Pack Container K108

What is the K108 flat pack container?

The K108 flat pack container is a two-room portable modular container unit with a central bathroom including WC, washbasin, and shower. It is suitable for accommodation, site offices, camp units, staff rooms, welfare spaces, and temporary project facilities.

What makes K108 different from K107?

K107 includes a WC and washbasin, while K108 includes a more complete bathroom with WC, washbasin, and shower.

Can K108 be used for accommodation?

Yes. K108 is highly suitable for accommodation-style use because it includes two rooms and an internal bathroom with shower.

Can K108 be used as a site office?

Yes. K108 can be used as a site office, supervisor unit, or project support office with internal bathroom facilities.

What sanitary fixtures are included in K108?

The layout includes a WC, washbasin, and shower in the central bathroom area.

How many windows does K108 have?

K108 includes two windows, with one window for each room.

Where is the external door located?

The main external entrance door is positioned in the middle of the unit.

How many internal doors does K108 have?

K108 includes three internal doors: one for each room and one for the bathroom.

Does K108 include electrical and plumbing installation?

Yes. K108 can include electrical and plumbing installation depending on the approved project specification.

Is K108 suitable for worker camps?

Yes. K108 is suitable for worker camps, construction camps, remote accommodation projects, staff facilities, and temporary site compounds.

Can the K108 layout be customized?

Yes. Room layout, bathroom configuration, door position, window position, furniture layout, electrical layout, plumbing layout, finishes, and other options can be customized depending on project requirements.

What information is needed for a quotation?

The key details are required quantity, intended use, site location, furniture needs, bathroom requirements, electrical requirements, plumbing requirements, delivery destination, and installation scope.